CS Soft Basic (includes CS Soft Energy Analyzer)

The software CS Soft Basic serves for reading out the measured data via Ethernet or USB stick and it enables the customer to analyze the measured data in graphic resp. in table form. Statistical evaluations as well as an energy and flow report complete the functions. The measured data can be exported as pdf file or Excel ® - file. The extra module CS Soft Energy Analyzer serves for analyzing the load/unload times of compressors. At the touch of a button the user gets important data like e. g. current costs, compressed air costs, leakage costs in Euro, compressor data with load/unload times, specific entry in kWh/m³, costs of the compressed air in Euro per m³. The software can be used without any license key for maximum 10 days upon the download. After 10 days the software has to be registered by entering a license key (subject to cost).

OS: Windows 2000, XP, Windows 7/8

Version: 2.0.0.26

Suported devices: DS 500, DS 500 mobile, DS 400, DS 400 mobile, DP 500, DP 510, PI 500

CS Soft Basic Demo File with measured values

CS Soft Network

By means of the CS Soft Network an optional number of DS 500 / DS 400 can be evaluated via Ethernet. The software stores the measured data of all DS 500 / DS 400 cyclically in the network into a SQL database on the server. The evaluation of the measured data can be done by several users at the same time. The measured data can be evaluated in graphic and in table form. An automatic energy and flow report enables the allocation of the costs and individual consumption of every single department. Alarm report in case of exceeding of the threshold values will be automatically sent by SMS or e-mail.

OS: Windows 2000, XP, Windows 7/8

Version: 1.2.4.0

Supported devices: DS 500, DS 400, DS 300

CSM-S

With the CSM-S software measured data can be read-out of DS 300 by means of an USB cable or via Ethernet interface. The measured data can be evaluated in graphic or table form.

OS: Windows 2000, XP, Windows 7/8

Version: 1.4.4

Supported devices: DS 300, DS 300 mobile

CSM-S including CAA (Compressed Air Analyzer)

With the CSM-S software including CAA measured data can be read-out of DS 300 by means of an USB cable or via Ethernet interface. The measured data can be evaluated in graphic or table form. With the extra software Compressed Air Analyzer compressors can be analyzed with regards to their load/unload performance.

OS: Windows 2000, XP, Windows 7/8

Version: 2.8.7 / 1.4.4

Supported devices: DS 300, DS 300 mobile

ZNetCom Software

By means of the ZNetCom software the optional Ethernet interface of the DS 300 devices can be set up. Change over between static and dynamic IP address assignment.

OS: Windows 2000, XP, Windows 7/8

Version: 2.56

Supported devices: DS 300 with integrated Ethernet interface

CS Service Software

With the CS service software and the interface adapter IF 100 the digital interface (SDI) of the dew point and flow sensors of CS Instruments can be accessed directly from the computer. The service software enables the user e. g. to scale the 4…20 mA analogue output, to change the parameters and so on.

OS: Windows 2000, XP, Windows 7/8

Version: 4.70

Supported devices: FA 300, FA 400, FA 410, FA 415, VA 300, VA 400, VA 420

The program serves for calculation of different humidity parameters like e. g. pressure dew point, absolute humidity, relative humidity, water vapor partial pressure and so on.

OS: Windows 2000, XP, Windows 7/8

Version: 1.11

Contact

Contact